How to Winterize RAMTEQ Electric Pressure Washer

Published:

2/7/2022

The two main things to do when winterizing your pressure washer are to make sure all the fluids have been drained and run anti-freeze through the system to protect from freezing and damage while in storage.

Winterize a RAMTEQ Electric Pressure Washer with no Float Tank


1. Prepare antifreeze

2. Attach a garden hose to the water inlet connection on the machine.


Tip: 3 ft. of garden hose will be long enough to get the job done.


3. Remove the pressure nozzle from the wand

4. Connect the other end of the hose into a container of antifreeze.

5. Place the wand into the antifreeze container.

6. Turn machine on.

7. Let antifreeze flow into the machine from the end of the wand.


Tip: Let the machine run for 2 - 3 minutes to make sure antifreeze has a chance to flow through the machine. 


8. Turn the machine off and replace the pressure nozzle.

9. Unplug your pressure washer, coil up the hose, and store it in a warm area (40 degrees Fahrenheit or warmer). 


Winterize a RAMTEQ Electric Pressure Washer with a Float Tank


1. Prepare antifreeze

2. Fill float tank with antifreeze.

3. Remove the water nozzle from the wand.

4. Carefully insert into the opening of the float tank

5. Turn machine on.

6. Let the machine run to let the antifreeze flow through the machine. 


Tip: Let the machine run for 2 - 3 minutes to make sure antifreeze has a chance to flow through the machine. 


7. Unplug your pressure washer and store it in a warm area (40 degrees Fahrenheit or warmer). Do not store flammable liquids near a pressure washer or in a non-ventilated area.


Tip: Place the machine in a covered area and protected it from cold temperatures.


If your machine has gas remaining in the tank use a fuel stabilizer to prevent that gas from gumming up causing a blockage in the lines. Make sure to remove all detergent and water from the pressure washer machine as well.


Winterize Your pressure washer - hire an expert


Not really sure how to winterize your pressure washer, don’t have time or the tools, or your equipment is at out shop being repaired, don’t worry! 


NorTex Sales & Service can winterize your pressure washer for you. Bring your equipment to us or schedule a service call for us to come to you. 


We are located in Dallas (214-630-7310), Kilgore (903-984-0099), and Odessa (432-653-1784).

Hours of operation for our Dallas and Odessa locations are Monday - Friday 7 am - 4 pm and Saturday 8 am - 12 pm. Hours of operation for our Kilgore location are Monday - Friday 7 am - 4 pm.


Share this Article ↓

Floor Scrubbers: Why Choose a Floor Scrubber?
Published: 9/07/2022 Floor scrubbers are conquering the market. Preserve your facility’s appearance by keeping your floors clean in less time,...
HVLS Fan Buying Guide: Everything to Know Before Purchasing
Published: 9/01/2022 What is HVLS? How do HVLS Fans Work? Where do HVLS Fans get installed? Check out this article...
Floor Sweepers: Why Choose a Floor Sweeper?
Published: 9/01/2022 Floor sweepers are the prodigy of sweeping with a broom. No more bending down or leaving traces of...